Hot water heaters are one of a property’s toughest working appliances. Day or evening, it’s making completely heated water at any time when you would like it. So when it all of a sudden is no longer working properly, many of us have a tendency to panic.
The good news is a non functioning water heater does not constantly indicate a pricey repair work. Before making an emergency call to us, we recommend checking the issue yourself first.
Water Heater Repair Troubleshooting
For gas water heaters first remove the small panel which is located at the bottom of the unit and check to see if the pilot light is ignited.
Find out if will igniate if it is not lit. If it stays lit, one should be able to notice that the water heater should begin operating effectively again. The pilot light might need cleaned out or the thermocouple might need replaced whenever the pilot light will not stay ignited.
The name thermocouple may appear like a incredibly technical name, however it’s an element on ones water heater that can easily be replaced. We would suggest having us complete the replacement but the guidelines right here are for educational objectives.
Consult the owner’s handbook. It ought to have information for how to remove and change the thermocouple.
Turn off the gas before taking out anything from the water heater.
Following the instructions in your user’s handbook, get rid of the thermocouple by removing it from both sides of the pilot light. The new thermocouple on the water heater is required to be cut to the right length.
The gas can then be turned back on and check out for leaks, then the pilot light may be lighted once again.
Press the Water Heater Reset Button
For people with an electric water heater, find the position of the reset button and press it until a click is noticed.
If a click is definitely not noticed, or it falls short to restart the water heater, reset the breaker.
If a breaker reset does not do the technique, the thermostat probably will need replaced.
Both the power to the water heater and the switch on the breaker will need to be switched off. Basic safety with electricity is required to be followed!
Use the owner’s guide to find the thermostat wires, then detach them.
Following removing the thermostat we will evaluate to see its problem. If it is malfunctioning, we will have to replace it.
Heating Element Replacement
While the power is still switched off, the access panel on the water heater can be taken off.
The terminal screws may be loosened and the wires may be drawn away from the heating element.
We would after that test every component of the element to verify if they are damaged, and change them as needed.
These water heater troubleshooting actions should help get ones heater going once again. We are definitely here for helping, and so don’t hesitate to contact us today for any water heater service.